When selecting Bronze POM (Polyoxymethylene) bushes with a thrust washer composite, metric thickness is a crucial factor to consider. The thickness of these components directly affects their performance and durability in various applications.

Bronze POM bushes are commonly used in machinery and equipment due to their excellent wear resistance, mechanical strength, and self-lubricating properties. When combined with a thrust washer composite, they provide an even more robust solution for applications that require high thrust loads and precision movements.

The metric thickness of the Bronze POM bush determines its ability to withstand compression and impact forces. A thicker bush can offer greater strength and durability, but it may also increase the overall size and weight of the component. Conversely, a thinner bush may be more suitable for applications with limited space but may not provide the same level of strength.

The thickness of the thrust washer composite is also important. This component supports the bush and helps distribute the thrust load evenly. A thicker thrust washer can provide more support and stability, while a thinner one may be sufficient for applications with lower thrust loads.

It's important to consult with a manufacturer or supplier to determine the appropriate metric thickness for your specific application. They can provide expert advice based on your requirements, such as the expected thrust load, operating conditions, and space constraints.

In summary, the metric thickness of Bronze POM bushes with thrust washer composites is a crucial factor to consider when selecting these components for your machinery or equipment. The appropriate thickness can ensure optimal performance, durability, and suitability for your specific application.

Buying Request of Sliding Bearings outside Copper Sleeve BLACK POM in the middle Standard size Bushing Dimensions Oil Holes tolerance inch size

High Load / Impact-Vibration Resistant / Composite Bushing for retailer and a repair centre

Inch Dimension, Thrust Washer Bushings inch series online catalog

Boundary Lubricating Bearings Black POM Bushes lead-free POM Lined Bushing

Boundary lubricated bearing is a sliding bearing with steel plate as the matrix, sintered spherical bronze powder in the middle and rolled round oil storage hole black modified polyformaldehyde (POM) material on the surface

Electro-hydraulic grooving machine grooving machine press wheel shaft sleeve press wheel bearing worry-free bearing

Bushings Material structure

1. POM 0.30-0.50mm modified polyformaldehyde has good wear resistance, and even in the case of instantaneous oil shortage, it also has a low friction factor.Bearing surface is arranged with a spiral Angle of the oil sump pit, assembly, must be coated with grease.
2. Copper powder layer 0.20~0.35mm, with good bearing capacity and wear resistance, good thermal conductivity can timely transfer the heat generated in the process of bearing operation.The composite material can infiltrate into the gap of copper powder ball and improve the bonding strength.
3. Low carbon steel, providing bearing capacity and heat transfer function of the bearing.

Detailed information

Boundary lubrication lead-free bearing is improved on the basis of VSB-20. It has the same performance as the VSB-20, but the surface does not contain lead, and the field of use can be extended to areas with environmental requirements.

Steel + Bronze Powder + POM(black)

Self Lube Bearings Product Category SF-2 Boundary Lubricating Bearing

1. POM thickness 0.30~0.50 mm. It provides high wearresistance and low friction even with only minute volume oflubricant are supplied, this bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.
2. Sintered bronze powder thickness 0.20-0.35mm. A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the layer and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel.Setting the foundation of the bushings, the steel back provides exceptional stability,load carrying and heat dissipation

· Metal-Polymer Composite Bushing Material
· Steel Back + Porous Bronze Sinter +POM with Lubrication Indents

Also for intermittent or boundary lubrication applications such as automobile pedal assembly, balancing bushing, brake tongs, steering spindle bushing and truck tail plate bushing

oil impregnated brass sleeve bearing

plain bearing

Bronze POM Bushes Thrust Washer Composite Metric Thickness Images